81999665226 81999665226 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 81999665226
Part name: 81999665226
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

801504648 GRGJC export vehicle tool box
803010522 8700068 Pump filter
803045152 101001191 Balance valve
803079124 PY180H.2.6.3 Brake shoe ZBJ-X
805000864 GB/T31.1-2013 Bolt M20×70
805001909 GB/T5782-2000 Bolt M24×140 ZBJ
805002084 GB/T5783-2000 Bolt M20×65(10.9)
805100100 GB/T70.1-2008 Screw M10×35
805203823 GB/T9459-1988 slotted nut M30×2
819906660 BH50FP blocking roller set (2pcs/set)
380900705 XGYG07-050 Right shovel angle change oil cylinder
800107064 0730150773 Wear pad (Hangto)
800308455 0630531346 retaining ring (Hang tooth)
800309253 BG10BⅡ.13-4A Rubber wheel
800309559 GB/T990-1991 short idler D89L315 Chongyang
800901445 JSM-J-Z10 Lock Female Right Angle End Fitting G3/8”
803010947 5000-E136 Combined multi-way valve
803011064 5000-E165 Multi-way directional valve
803011211 06-463-200 Filling valve
803011214 09302540DWG/01 Two-way hydraulic lock
803012576 CB-H16-HFL gear pump
803012577 CB-H32/32R double gear pump
803191355 HTH2-T/MG1/4-2000A measuring hose
803502633 CST220 Magnetic Proximity Switch
803736308 RXZE1M4C intermediate relay base
805046508 GB/T5783-2000 Bolt M8×20 10.9(Dacromet)
805100086 GB/T70.1-2008 Screw M10×90
380900836 GR215.24-2 adjusting steel sheet
380900925 GR215Ⅹ.14-6 Flange
380903077 GR215Ⅹ.17.6-1A tie rod
381300937 GR300Ⅱ.10.1-1A baffle
381600195 PY180G.17.7/17-25 front axle hub assembly
381600230 PY180-G6 Left blade lift cylinder
381600375 PY180G.10.1-8 Washer
381600378 PY180G.12-10 rubber ring
381601225 PY180G.13.6B telescopic pin
800105256 P781098 Air filter main filter element
800105257 P781102 Air filter safety filter element
800107065 0730150777 Wear pad (Hangto)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service