Angle drive 804018028 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 804018028
Part name: Angle drive
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

PB84P30-001M FUEL INJECTOR YT4A2-24
13034886 THRUST BEARING SET
490B-42000 WATER PUMP
LR020043/44+0,25 THRUST BEARING SET OVER SIZES +0,25
LR020041/42+0,25 MAIN BEARING SET OVER SIZES +0,25
490B-04201/4202 CONNECTING ROD
272200123 TRANSMISSION SHAFT – Z 42
2FKW000139 SENSOR BOARD
LN910/LN912,1-1 PUMP COUPLING
BJ130 BRAKE PUMP
A3000-1002063B ENGINE LINER O`RINGS SET
490B-11013B OIL CAP
ZL30D-11-02 SHAFT
803588207 AIR CONDITIONER FILTER
330-1007011D INTAKE VALVE
D30-1003103B EXHAUST VALVE
630-1004052 CONNECTING ROD BUSHING
VG2600020208 RING GEAR
6105QA- WATER TUBE
6105QA-1008030B EXHAUST GASKET
400403896 cable
860110603 seal
860113862 universal joint
4935793 Water pump
B8700-111905 INJECTION PUMP COUPLING
X4BQ85Y017 FUEL INJECTION PUMP
VG1096040330 WATER MANIFOLD
803172727 HYDRAULIC FILTER
A490B-03109 INJECTOR SLEEVE
12273399 TAPPET
12159194 PUSH ROD
630-3509101 COMPRESSOR COVER ASSY W /VALVES
803004037 VALVE GOVERNOR
ZL09,5-7C DOBLE GEAR
490B-GK ENGINE GASKET SET
330-1111040-179 INJECTION ADVANCER

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service