Broken hammer skid steer loader auxiliary tools

Short Description:

Application

We can supply most of the Chinese brand Broken hammer ,

Chinese Bobcat S16/S18/S70/S100/S450 Auxiliary tools Broken hammer

Chinese CAT Auxiliary tools Broken hammer

Chinese LIUGONG Auxiliary tools Broken hammer

Chinese XCMG XC740K/ XC750K/XC760K Auxiliary tools Broken hammer

Chinese CASE Auxiliary tools Broken hammer

Chinese Sunward Auxiliary tools Broken hammer

Chinese YIXUN Auxiliary tools Broken hammer

Chinese LUYUE JC25/JC35/JC45G/JC60G/JC120 Auxiliary tools Broken hammer

Chinese LONGGONG Auxiliary tools Broken hammer

Send email to us

Product Detail

Product Tags

broken hammer

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

The power source of the hydraulic breaker is the pressure oil provided by the pumping station of the skid steer loader, which can more effectively clean the floating stones and the soil in the cracks of the rocks in the role of excavating the foundation of the building. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the skid steer loader and the operating environment.
Specifications

Item	Unit	530	680
Operating weight	kg	120	250
Work pressure	MPa	9-12	11-14
Work flow	L/mm	25-50	40-70
Strike frequency	BPM	600-1100	500-900
Drill rod diameter	mm	53	68
Length	mm	570	570
Width	mm	1202	1660
Height	Mm	1326	1660

Instructions
1) Read the operating manual of the hydraulic breaker carefully to prevent damage to the hydraulic breaker and excavator, and operate them effectively.
2) Before operation, check whether the bolts and connectors are loose, and whether there is leakage in the hydraulic pipeline.
3) Do not peck holes in hard rocks with hydraulic breakers.
4) Do not operate the breaker with the piston rod of the hydraulic cylinder fully extended or fully retracted.
5) When the hydraulic hose vibrates violently, stop the operation of the breaker and check the pressure of the accumulator.
6) Prevent interference between the boom of the excavator and the drill bit of the breaker.
7) Except for the drill bit, do not immerse the breaker in water.
8) Do not use the breaker as a lifting device.
9) Do not operate the breaker on the crawler side of the excavator.
10) When the hydraulic breaker is installed and connected with the hydraulic excavator or other construction machinery, the working pressure and flow rate of the main engine hydraulic system must meet the technical parameter requirements of the hydraulic breaker, and the “P” port of the hydraulic breaker is connected to the main engine high-pressure oil circuit Connect, the “A” port is connected with the return line of the main engine.
11) The best hydraulic oil temperature when the hydraulic breaker is working is 50-60 degrees, and the maximum should not exceed 80 degrees. Otherwise, the load of the hydraulic breaker should be reduced.
12) The working medium used by the hydraulic breaker can usually be the same as the oil used in the main engine’s hydraulic system. It is recommended to use YB-N46 or YB-N68 anti-wear hydraulic oil in general areas, and YC-N46 or YC-N68 low temperature hydraulic oil in cold areas. The filtration accuracy of hydraulic oil is not less than 50 micro; m.
13) The new and repaired hydraulic breaker must be refilled with nitrogen when it is started, and its pressure is 2.5, ±0.5MPa.
14) Calcium-based grease or compound calcium-based grease must be used for lubrication between the handle of the drill rod and the guide sleeve of the cylinder body, and it should be refilled once per shift.
15) When the hydraulic breaker is working, the drill rod must be pressed on the rock first, and the breaker must be operated after maintaining a certain pressure. It is not allowed to start in the suspended state.
16) It is not allowed to use the hydraulic breaker as a crowbar to avoid breaking the drill rod.
17) When in use, the hydraulic breaker and the fiber rod should be perpendicular to the working surface, based on the principle that no radial force is generated.
18) When the broken object has cracked or started to produce cracks, the impact of the breaking hammer should be stopped immediately to avoid harmful “empty hitting”.
19) If the hydraulic breaker is to be stopped for a long time, the nitrogen should be exhausted, the oil inlet and outlet should be sealed, and the iron cut should be stored under high temperature and below -20 degrees.