Chain link 110500737 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 110500737
Part name: Chain link
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

800107090 0750115211 Needle bearing K45×75×32(Hangto)
800107101 0750119100 Roller set
800107311 54100015 Bearing (Meritor)
800141681 C3966841 Thermostat
800153853 80513012 Round nut M75×2
800302464 Chain 28A-1×74
800302489 SPC4000 V-belt
800307630 Hand brake controller LJ112B
800307648 Coupling LJ103A×1300-LJ110C×2000
800307703 12″B2 track shoe
800307710 Boost type hand brake flexible shaft XY114-BG10A
800308342 4644351094 Stopper (Hang tooth)
800308438 75500269 Lock Nut(Meritor)
800309561 GB/T990-1991 Forward inclined grooved roller set D89B1000 Chongyang
800350005 4644230027 Partition (willow teeth)
800511405 GB/T7813-2008 bearing seat SN522
800511487 Bearing UCP206
800511557 JB/T7919.2-1999 Adapter sleeve H2322
800515217 JB/T3120 bearing 22232
800515930 GB/T7810-1995 Bearing UCFU211
800553758 JSM-2532-32 Sleeve
800752759 Double acting pneumatic wafer butterfly valve VF-735DA
800901217 S6510 Push-in fitting 12-1/2”
800902576 SI-100X200-S Cylinder
800902579 GC600-25-A-C1-3 triplets
800902617 SI50 cylinder repair kit
800902620 SI125 cylinder repair kit
800903239 φ12×1 sub-tube (unit meter)
800903243 ABL8-02 Lock Nut Right Angle Terminal
800936584 ABC10-02 Lock Nut Straight Through Terminal
800936772 ABE4 Lock Nut Tee
801102875 GB/T3452.1-2005O-ring 32.5×3.55
801902876 V-belt SPB1800
801902925 XG-006 sealing strip (t6×50)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service