Cross spirit level 803754106 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 803754106
Part name: Cross spirit level
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

800153240 C3934864 Connecting rod nut
800305191 HG2297-92 Ring belt 650X4(3+1.5)X3800
800307674 Coupling LJ103A×1300-LJ110C×2100
800345915 85763003 Sprocket and Shaft Assembly Meritor
800351160 WTD11S41 Coupling sleeve
800511528 Bearing UCT208
800515238 JB/T7915-1995 thrust needle roller and cage assembly AXK5070
800515298 SQZ20-RS spherical plain bearing
800902618 SI80 cylinder repair kit
800902619 SI100 cylinder repair kit
801138334 53000040 O-ring (Meritor)
801907100 φ58(+2.4–5.6) T-clamp
803010870 XGSX07-18 Radiator assembly
803010881 XGSX07-33 Radiator assembly
803190583 JWR-Z15 plug-in straight-through terminal pipe joint G1/2
803190710 YL15L three-way combination joint
803191748 LQ06LM10×1KDS Articulated Combination Joint
803197955 O-ring 375×5.353000063
803500333 ICE911-243001 Water Temperature Gauge Kangbo ZBJ
803506817 PS61-50-2MNZ-B-SP-FS110BARF accumulator pressure
803507285 EC8005CE low oil pressure alarm sensor (engine comes with)
803542747 6-QW-120B battery (Valta)
803604833 WRN-230-II 450A300G1 Thermocouple
803668809 6N terminal block
803676944 EV200AAANA relay
803677789 RY4S-UL-D24 relay
803705278 MY2/AC220V relay
805000492 GB/T5782-2000 Bolt M16×180
805000507 GB/T5783-2000 Bolt M20×80 10.9
805000520 GB/T5783-2000 Bolt M24×100
805006425 GB/T5782-2000 Bolt M20×70 10.9(Dacromet)
805010104 GB/T5783-2000 Bolt M14×75(10.9)
805046550 GB/T5783-2000 Bolt M12×45(Dacromet)
805046642 GB/T5782-2000 Bolt M12×65 10.9(Dacromet)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service