Delivery cylinder XCMG concrete pump spare parts

delivery cylinder

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing  

Carton Boxes, or according to clients’ request.

description

The Features for Delivery Cylinder/ Concrete Cylinder Pipe:
1. Durable cylinder is made of high quality carbon steel Hardness >HRC64
2. Use advanced chromium plating process for inner wall, 0.26-0.33 mm super-thick chromium plating layer
3. Unique structure design on both ends of the flange, sharply increased the assembly precision and strength of the concrete cylinder key stress cross section structure

The Specifications for Delivery Cylinder/ Concrete Cylinder Pipe

Maintenance of the pumping part

1. Check the oil quality and oil level of the hydraulic oil every 8 hours when the pump truck is working, and replenish and replace it if necessary. The newly added hydraulic oil must have the same grade as the oil in the tank. The pump truck is filled with hydraulic pressure before leaving the factory. The oil is Esso H46. Generally, when pumping 20,000 cubic meters of concrete or using it for half a year, the oil should be completely changed once. When changing the oil, the oil tank must be cleaned and the oil tanks of each part must be drained;

2. Check the oil level of the lubricating oil every 8 hours when the pump truck is working. It is recommended to use non-extreme pressure type semi-fluid lithium base grease. When pumping, there should be places where the concrete cylinder is connected to the water tank, the bearing seat of the S tube and the mixing end seat. Lubricating oil overflow;

3. After the pump truck has pumped 3000 cubic meters, the gap between the glasses plate and the cutting ring should be adjusted. If it is severely worn, it must be replaced immediately. Check that the concrete should be well sealed and no mortar seeped into the water tank;

4. After the pump truck is used for 500 hours, check the wear condition of the S tube and the bearing position of the S tube, and replace the shaft sleeve and taper sleeve if necessary;

5. Check the indication of the vacuum gauge of the suction filter of the pump truck. If the pointer of the vacuum gauge reaches the red area (that is, it exceeds 0.04Mpa), the filter element must be replaced;

6. Each system must be checked when starting up, check whether the system pressure is normal, and check whether the hydraulic system is leaking;

Our-warehouse1

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts