Door hinge assembly truck spare parts for XCMG HOWO truck

Short Description:

We supply kinds of Door hinge assembly for Chinese different Chassis, Chinese JMC Truck Door hinge assembly, Chinese Dongfeng Truck Door hinge assembly, Chinese Shacman Truck Door hinge assembly, Chinese Sinotruck Truck Door hinge assembly, Chinese Foton Truck Door hinge assembly, Chinese North Benz Truck Door hinge assembly, Chinese ISUZU Truck Door hinge assembly , Chinese JAC Truck Door hinge assembly, Chinese XCMG Truck Door hinge assembly, Chinese FAW Truck Door hinge assembly, Chinese IVECO Truck Door hinge assembly, Chinese HongYan Truck Door hinge assembly.

Send email to us

Product Detail

Product Tags

Door hinge assembly

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

In the daily use of vehicles, the door hinges are often damaged. There are many reasons for this failure. The more common ones are improper door opening: Tiansheng car door hinge shafts or holes are severely worn. 1. Improper opening of the door. Trouble phenomenon: The door cannot be opened and closed freely. When the door is closed, the door lock is not closed properly, and there is a rebound phenomenon: When the door is opened, the door lock feels like it will bounce. figure 1). Causes of failure: 1) Excessive force when opening the door, causing damage to the door limit device, the excessive opening of the door, resulting in damage to the loose-leaf; 2) Unexpected cause of the deformation of the door hinge.
Elimination method: find a piece of 100mm long. 40mm wide. A wooden block with a thickness of 15-20mm opens the door to a certain angle. Insert the wooden block into the deformed loose-leaf hinge and close the door with appropriate force to correct the deformed hinge (see Figure 2). After correction, remove the woodblock for inspection. Repeat several times to eliminate the fault. Note: Do not use too much force at one time to avoid over-correction. 2. Hinge shaft or hole is severely worn. Trouble phenomenon: the lower corner of the door without hinges sags, the door and the door frame rub against each other: the door lock is misaligned up and down: the door switch is laborious or closed: the gap on the hinge side of the door is wide and narrow. The cause of the fault: The vehicle has been used for a long time or the lubrication is not enough, causing serious wear of the hinge shaft or hole of the door hinge. The gap between the hinge shaft and the hole is too large, causing the door and the door frame to shift relative to each other. Remedy: When the door hinge shaft or hole is worn and the door sags, the lower hinge of the door should be adjusted first. The adjustment method is basically the same as the fault caused by the improper opening of the door. If the fault cannot be eliminated, the upper hinge of the door needs to be adjusted. Loosen the screws that fix the loose-leaf hinge on the driving door to the side of the cab (the screw hole of the loose-leaf hinge on the side of the cab is generally a long hole if it is a round hole, a long hole can be processed, and the processing direction is the side of the hinge shaft) . Adjust the size of the door gap, the fault can generally be eliminated after adjustment. This method is suitable for the repair of various vehicle door hinges. In addition, remind all drivers and friends that in the daily use of the vehicle, ensure that the door hinges are sufficiently lubricated to reduce the wear of the hinges: when moving the vehicle, be sure to close the door to avoid accidental damage to the door: open, Do not use excessive force when closing the door to avoid opening the door too much.