Excavator grasper gripper excavator attachment excavator spare parts

Short Description:

The excavator gripper is suitable for grasping various objects, such as scrap metal, industrial waste, construction or domestic waste. The excavator gripper is divided into two types: rotating and non-rotating. The non-rotating digging gripper adopts the oil circuit of the excavator bucket cylinder, and there is no need to add additional hydraulic valve blocks and pipelines; however, the rotating gripper needs to be additionally added. A set of hydraulic valve block and pipeline to control. At the same time, the upper cylinder of the gripper is equipped with a piston protection device.

Send email to us

Product Detail

Product Tags

description

The grasper is a kind of working device of the excavator, and its claws are driven by hydraulic energy or electric energy to open and close, so that the objects can be transported and grasped. Because of its strong grasping force, durability, high efficiency and convenience, it is often widely used in industry, agriculture, national defense, forestry, water conservancy and other occasions.

There are many styles of excavator graspers. The number of teeth varies from two teeth with six teeth. Different numbers of teeth correspond to different functions. When grasping cement stones, use a three-teeth grasper, and when grasping wood, use two. The grasper of the teeth, but the grasper with more than four teeth should be used when grasping scattered reinforced concrete. Because of the scattered nature of these steel bars, a grasper with two or three teeth alone cannot complete the task of grasping steel bars, and a grasper with more than three teeth must be used.

characters

1.360-degree hydraulic swivel, providing more flexible grasping effect

2. Double motor rotation, more torque

3. The edge of the grab adopts imported HARDOX400 sheet, which has a longer service life

4. The cylinder has a built-in balance valve to maintain the clamping force and provide higher safety

5. The oil cylinder and control rod are built-in, and the shell provides protection to keep the grasping synchronization

Remarks: This product is continuously improved with the progress of technology. The difference between the parameters and structural characteristics listed above is subject to the actual product.

———————————————-

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other product part numbers we have：

1.Komatsu Engine parts: water pump, turbocharger, diesel pump, oil pump, engine
assembly, cylinder head gasket, silencer, crankshaft, camshaft, bearing injector, hand
pump, piston, connecting rod, engine overhaul kit, etc. ;

2. Komatsu Hydraulic Parts: swash plate assembly, hydraulic pump bearing, gear pump,
solenoid valve, servo plunger, main valve, hydraulic pump PC valve, nine-hole plate,
pumping plate, hydraulic pump copper ball, etc.;

3. Traveling rotary parts: rotary reducer, travel reducer, rotary vertical shaft, final
drive, travel assembly, rotary assembly, first-stage carrier assembly, secondary center
wheel, and secondary carrier assembly;

4. Cab parts: pre-filter, door lock, work light, walking PC valve, cab assembly,
tightening cylinder, etc.;

5. Chassis parts: horse head, support wheel, guide wheel, roller, bucket connecting rod,
bucket pin, bucket cylinder, ripper, cylinder liner, chain assembly, bushing, ripper
assembly , boom front fork, digging bucket, etc.

6. Electrical components: wiring harness, relay, solenoid valve group, sensor, cab
computer version, etc.

7. Seals: air filter hose, fuel pipe, intake pipe, boom cylinder repair kit, floating
oil seal, bucket cylinder repair kit, large pump repair kit, stick cylinder repair kit,
travel motor repair kit, main valve repair Bag, center joint repair kit, hydraulic pump
carbon ring, etc.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service