Foot plate assembly 137900094 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.


Product Detail

Product Tags

description

Part No: 137900094
Part name: Foot plate assembly
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers:

805000432 GB/T5782-2000 Bolt M6×45
805000700 GB/T5782-2000 Bolt M16×120
276100557 LQC80B.5.1.3-5 Liner (5)
380300657 GR135.13-3 copper sleeve
380600513 GR180Ⅲ.01-13 Rubber pad Ⅲ
380900873 GR215.01-18 plug
380900881 GR215Ⅹ.01.2 take over
380900916 GR215Ⅹ.14.3 tie rod
380901142 GR215C.12.4 slewing bearing
380903563 GR215.10.1-3A right blade
381400223 PY160G.02.4-1 rod
384201376 RH200.01.1-12 splint
387400407 XC500.05.50-3 Gasket
393100822 XL210G.19.1-6 Bullet Blade Bar II
800141693 C3948095 Cylinder barrel
800302500 GB1243.1-1983 Chain 10A-1×92
800307730 4-5VP-1060 drive V belt
800752692 Water filter SLQ-150(A)
800937207 AC220V-3.5VA solenoid coil (including terminal)
801103518 12015284(ZL) sealing ring
803007356 Asphalt pump mechanical seal (universal for 80/90/100 pumps)
803010933 5000-E124 Combined multi-way valve
803190305 FS1007 fuel filter
803191918 F481CACA060604-700 Hose assembly
803506985 ZG901(M18X1.5) speed sensor
803546714 LW210A LED Work Light
805001959 GB/T5782-2000 Bolt M20×80(10.9)
805002025 GB/T5783-2000 Bolt M10×75
805009805 GB/T5785-2000 Bolt M12×1.5×35
805046416 GB/T5783-2000 Bolt M10×30 10.9(Dacromet)
805046494 GB/T5783-2000 Bolt M6×12(Dacromet)
805046547 GB/T5783-2000 Bolt M12×35(Dacromet)
805048380 GB/T5783-2000 Bolt M12×35(10.9) (Dacromet)
805105425 GB/T70.1-2008 screw M5×75
805140786 GB/T70.1-2008 Screw M16×50 10.9 (Dacromet)
805200236 GB/T6184-2000 Nut M12
805300019 JB/T982-1977 Washer 42
805338264 GB/T96.1-2002 Gasket 6 (Dacromet)
819911280 Piston 3923537 (Dongkang)
819911336 Inner friction plate 4642308332 (Hang tooth)
819911361 Injector Parts D28-001-41 (Shangchai)
819947375 Intermediate relay JTX-3C 220V

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts!

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

Our-warehouse1

Our-warehouse1

Pack and ship

Pack and ship

  • Previous:
  • Next:

  • Write your message here and send it to us