Girth 134906070 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134906070
Part name: Girth
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

276920304 XAP160Ⅱ.5.1.1.3-2 Liner 9
380300749 GR135.13-5 bushing
380900926 GR215Ⅹ.14-7 Cover
381600465 PY180G.10.2.2.3-5A Left side guard
395102141 XF100.10-32B connecting shaft
396100878 XT120.05.7-4 Rubber pad
800105925 Blower fan φ700G16-002-01
800107350 77500940 Ring gear support (Meritor)
800148124 217638-20 Drive Belt
800151104 3289448 Engine Belt
800307370 PMC2000 reducer
800307595 Hydraulic gearbox 4644606237
800307694 GB/T1243-2006 Roller chain 20A-2×18
800341017 7207-577B Drive shaft
800345914 85763002 Sprocket and shaft assembly Meritor
800511481 Bearing UCP212
800901218 S6510 Push-in fitting 12-3/8”
800903163 Foot brake valve QF-14B
803010921 HV-02 reversing valve
803010962 403-7975-02 Steering Gear
803190320 S30A20/2 check valve
803190761 LH10L Right Angle Combination Joint
803192145 GB/T3452.1O type sealing ring 95×3.55
803506793 KB310 belt weighing instrument
803701850 WRN-230-II 185A120 Thermocouple
803705809 LLY50-22B-11M flameout button
805010068 GB/T5783-2000 Bolt M20×1.5×65 10.9
805010099 GB/T5783-2000 Bolt M18×130 10.9
805010125 GB/T32.1-1988 Bolt M8×40 10.9
805046892 GB/T5783-2000 Bolt M10×45(Dacromet)
805100037 GB/T70.1-2008 Screw M8×25
805104249 GB/T70.1-2008 Screw M24×80 10.9

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service