Girth 1349092280 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 1349092280
Part name: Girth
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

803190777 YT12L three-way combination joint
803500267 RG1163-M4 Fuel sensor
803548022 HBM-X002/24V rear combination lamp
803604873 Travel switch XCK-J10541C
803704220 ZDU6 terminal
805046455 GB/T5783-2000 Bolt M10×45 10.9(Dacromet)
805100195 GB/T70.1-2008 Screw M5×50
805604497 PY180G.13.6 Telescopic pin
805801077 GB1243.1-1983 Roller chain 16A-1×94
819911339 Outer friction plate 0501309M625329 (Hangtooth)
276400922 1440×1514×3 screen (standard)
276900733 XAP160.5.1.1.7-8 Liner 8
276903416 XAP160.5.1.1.7-9 Liner 9
276906502 XAP160.5.1.1.7-4A Liner 4
380300730 GR135.09-1 gasket
381300779 GR300Ⅱ.10.2.1-6 stiffener
800140976 C4948364 Injector assembly (Dongkang)
800345827 Air compressor belt (TA-125)
800515240 GB/T5801-1994 Needle roller bearing NK60/35
801103649 Oil return filter RFB-63×10F-Y
801103650 Oil suction filter TF-63×80L-Y
803190520 YL12L three-way combination joint
803190682 I15LM22×1.5ED straight connector
803190884 QG1/2-3/8 straight fitting (external thread)
803191725 I12L3/4UNFO straight connector
803192168 XLZ250-O-ring O-ring O-ring a pack
803192243 GB/T3452.1-2005 O-type sealing ring 46.2×3.55
803507316 GMH-1-50kg pressure sensor (sub-high)
803543101 D59-105-23+A flameout solenoid valve
803612153 XB2-BJ21 selector switch
805046481 GB/T5783-2000 Bolt M6×16(Dacromet)
805048257 GB/T32.1-1988 Bolt M20×1.5×45 10.9(Dacromet)
805338380 GB/T93-1987 Washer 5 (Dacromet)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service