Girth 134909274 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134909274
Part name: Girth
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805047454 GB/T5785-2000 Bolt M24×2×180 10.9
805048340 GB/T5783-2000 Bolt M12×40(10.9) (Dacromet)
805140879 GB/T818-2000 screw M8×20 (Dacromet)
805200087 GB/T6172.1-2000 Nut M30
805338334 Nord-Lock washer 12
822735017 Yellow topcoat for road rollers (BASF)
859935448 2XK5V Ignition Transformer (RL130) Heat Transfer Oil Furnace Ignition High Voltage (Fida)
276601749 XAP320.02.5.4.1.3 Reinforced feeding claw
380300659 GR135.14.1-1 Sliding bearing
380600384 tire assembly LTZC13.00-24TG-TT
380602179 GR180D.18.1A box
380900913 GR215Ⅹ.14-8 Bushing
380901007 GR215A.09-5 Joystick
380901009 GR215A.09-7 Joystick
381600228 PY180-G5 Blade swing cylinder
384102046 XM101E.12.18-3 Vertical knife holder
390100520 XLZ210.05.3.1-6A Toolholder II
800903167 T-branch threaded tee PST12-03
801103637 Filter RFB-100×10Y
803074426 XGYG07-147 Lifting cylinder
803190321 ZS1-L20E-T/00 hand operated valve
803190692 LH15L Right Angle Combination Joint
803191856 HTH2-H12L/H12L-1100A Pressure measuring hose
803192169 XLZ250-ED sealing ring ED sealing ring a pack
803192247 GB/T9877.1-1988 Oil seal PD170×200×15
803506759 6-QW-120B battery
803543268 1GA011408-027 Work Light (Halogen)
805003903 GB/T5782-2000 Bolt M16×60(10.9)
805604499 PY180G.17-16 pin
819943266 BHR240-108-750 Flat idler
819947466 DN25/800 B grade metal hose
822332518 Welding wire ER307Si
276400184 LQC160.16.4-9A tension spring

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service