Girth 134909667 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134909667
Part name: Girth
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

380900993 GR215A.17-1 steering pin
380903064 GR215Ⅹ.17.7.3A connector
380904085 GR215K.09-14 Spacer
381600226 PY180-G4 Right Articulated Steering Cylinder
387400413 XC500.05.50-4 felt ring
800106618 3948095 Cylinder liner
800150390 Engine 6CTA8.3-C215-Ⅱ(SO20870)
800307629 Hand brake controller LJ112A
800346271 84660413 Brake pad (Meritor)
800511430 JDB-1/D=33 L=25 bearing sleeve
800901252 K02-60-80X Seal Pack
800903158 Right angle terminal fitting PL12-03
800903164 T-Thread Tee PT12-03
800903197 KKP series quick exhaust valve KKP-L15
800903198 QE filter pressure reducing valve QE215-0437-TZ
801103638 Filter WU-63×80-J
803011215 09301540DWG/01 Two-way hydraulic lock
803011223 XGYG07-128 Rear ripper lift cylinder
803013334 Left multi-way valve 200-4-011551019
803045291 XG92-32B-00 lift cylinder
803078015 YK100-03-1NZS-1-DPF-IP-Z-SP5BARR brake light pressure switch
803190714 SV12LOMDCF(L=25) Connector
803192150 GB/T3452.1 O-ring seal 106×3.55
803373534 TG505.06.1 Metal tube assembly
803507297 XH-16G GPS vehicle intelligent data terminal
803544179 WRN-230(L450×300G1/2) Thermocouple
803705277 MY4NJ AC220V intermediate relay
805000205 GB/T31.1-2013 Bolt M16×70
805002090 GB/T5783-2000 Bolt M24×60 10.9
805002148 GB/T5786-2000 Bolt M14×1.5×40 10.9
805011248 83513205 Bolt
805046180 GB/T5783-2000 Bolt M12×55 10.9(Dacromet)
805046979 GB/T5782-2000 Bolt M24×70 10.9(Dacromet)
805047449 GB/T5783-2000 Bolt M8×55(Dacromet)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service