Good Quality Xcmg Motor Grader Parts - Hydraulic Steering gear for Motor Grader spare parts – CCMIC

Hydraulic Steering gear

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

Advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

The function of the Hydraulic Steering gear is to appropriately transform the steering torque and steering angle from the steering wheel (mainly deceleration and increase torque), and then output to the steering tie rod mechanism to turn the car, so the Hydraulic Steering gear is essentially a deceleration transmission device. There are many types of Hydraulic Steering gears, such as rack and pinion type, recirculating ball type, worm-crank pin type, power Hydraulic Steering gear and so on.
Product features of Hydraulic Steering gear
1. When installed at the same end of the shaft, the clearance is generally pre-adjusted (through Hydraulic Steering gears or grinding end faces), and two bearings must be fixed. Therefore, after operation, there will be a reduction in clearance between face-to-face and back-to-back.
2. In the case of installing on both ends of the shaft, it is generally necessary to adjust the clearance on site, and it is also necessary to fix two bearings at the same time, or reserve the system clearance (depending on the direction of the axial force, only one end bearing bears the axial force , The clearance is reduced; the other is only subjected to radial force, and the clearance is also reduced.)
3. When installing back to back, the center of load is outside the center line of the bearing; the span between the intersections is larger and the cantilever length is smaller, so the rigidity of the cantilever end is larger. When the shaft is heated and elongated, the bearing clearance increases and the bearing does not It will be stuck and destroyed.
4. When face-to-face installation, the center of load is within the centerline of the bearing; the structure is simple and easy to disassemble. When the shaft is heated and elongated, the bearing clearance is reduced, which is likely to cause the bearing to jam, so pay special attention to the bearing clearance. Adjustment.

Our-warehouse1

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts