Horizontal cylinder piston rod 910115712 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 910115712
Part name: Horizontal cylinder piston rod
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805105446 GB/T825-1988 lifting eye screw M12
805140033 GB/T70.1-2008 Screw M16×70 10.9(Dacromet)
805238375 GB/T6170-2000 Nut M20 10 (Dacromet)
805300032 JB/T982-1977 Washer 22
805338764 GB/T97.1-2002 Gasket 20 (Dacromet)
805801495 GB/T7384 skirt belt (B=800)
819909324 XMTA4102 Thermal oil furnace temperature control meter (oil furnace / oil return port)
819947556 4# 5# Burner Nozzle (TBL45P)
822537558 Mobil VG220 (18L/barrel)
276601120 XAP320.06.8 Hopper
380501008 GR165DⅧ.10.2.2-4 Right bending plate
380501009 GR165DⅧ.10.2.2-1 Left side bent plate
380800260 GR200D.12.4 upper liner
380900989 GR215A.01-6 connecting sleeve
380901035 GR215Ⅹ.10.1-4 Rubber pad
384100586 BG10BⅡ.01.7 Safety device
384102028 XM101E.12-14 Spacer
384102030 XM101E.12-16 bearing seat
384102031 XM101E.12-17 retaining ring
387300127 XC400.05.23-2 stirring arm
800107312 82513601 Main drive gear pair (Meritor)
800307582 Hydraulic gearbox YD13006013
800307711 GB/T7984 Conveyor belt 800×4×4100S60-0
800308446 52020006 Washer 16(Meritor)
800309307 C3288812 Belt (new purchase on the 6th)
800903200 Muffler FXS-W-Z8-G1/4
802103806 A0-B23392 Front lower glass
803103832 LH22L connector body
803170527 Oil filter element TFX-800×100
803500839 RY242-2A Fuel gauge
803506729 YZU2.5-4 vibration motor
803506815 0166-407-01-1-025 brake light switch
803506962 C3415537 Starter
803612144 MO17069/15R brake light pressure switch

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service