Hot New Products Fujitsu Excavator Hydraulic Pump - Start relay for excavator spare parts – CCMIC

start relay

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

The start relay is a separate component, its function is to switch on, insert the attracting coil and the holding coil circuit. The function of the starter relay is to help the motor start, and the auxiliary winding is automatically disconnected after the start is completed to avoid burning the auxiliary winding coil.
When the start relay fails, the compressor will gradually run out of adjustment. After the starting capacitor is started, it cannot be cut off from the circuit or the compressor cannot be started after the inverter is normally closed before starting. Operation, the cause is that the relay wire is loose, replaced, contact points are worn or welded, too dirty, uneven, coil short-circuit or open circuit, etc.
For compressors that use start relays, when you hear a “humming” sound from the compressor and cannot start, check whether the start relay is correct. The main fault of the relay is the attenuation of the elastic force of the return spring, and the contact is closed when it is started and it is difficult to open. The starting current adjustment screw can be adjusted. If the adjustment screw is not easy to turn, the spring can be inserted and pulled with flat pliers until it is adjusted to normal.
Why does the excavator start relay often burn?
1. The generator of the excavator may be broken. Because the generator of the excavator is broken and cannot be connected to electricity, it cannot catch fire. This needs to be repaired. If the problem is serious, the generator must be replaced.
2. Try to disassemble the battery pile head, and then reinstall it to see if it is an assembly problem, sometimes it is caused by improper assembly or circuit failure.
3. Check the starter relay or relay circuit of the machine to see if there is a short circuit or open circuit. Short circuit or open circuit will not catch fire. This needs to be found and then connected.
4. It may be that the battery clamp of the excavator is loose and cannot catch fire. In this case, just reinstall it.
5. Check the safety start relay to see if there is a short circuit.

Our-warehouse1

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts