Idler Shantui bulldozer spare parts
Idler
Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones
Advantage
1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service
Packing
Carton Boxes, or according to clients’ request.
description
causes of damage to the Idler of the bulldozer
The main reasons are as follows:
1. The bimetal sleeve sliding bearing of the Idler is out of tolerance in different axial degrees, and the crawler will cause vibration and shock. Once the geometric size is out of tolerance, the clearance between the Idler shaft and the sleeve will be too small or no gap, and the thickness of the lubricating oil film will be insufficient or even no Lubricant film.
2. The surface roughness of the Idler shaft is too poor. There are many metal ridges on the shaft surface, which destroy the integrity and continuity of the lubricating oil film between the shaft and the sliding bearing. During operation, a large amount of metal wear debris will be produced in the lubricating oil, which will increase the surface roughness of the shaft and the bearing, and the lubrication state will become more and more deteriorated, causing serious wear of the Idler shaft and the sliding bearing.
3. The original structure has defects. The lubricating oil is injected from the screw plug hole at the shaft end of the Idler, and then gradually fills the entire cavity. In actual operation, if there is no special oil injection tool, it is difficult for the lubricating oil to pass through the circuitous cavity in the Idler under the action of its own gravity. The gas in the cavity is not discharged smoothly, and it is difficult to fill up the lubricating oil. The oil filling space of the original machine cavity is too small, resulting in a serious shortage of lubricating oil.
4. The lubricating oil in the gap between the Idler shaft and the shaft sleeve cannot take away the heat generated by the bearing operation because there is no oil passage, which causes the operating temperature of the bearing to rise, the viscosity of the lubricating oil to decrease, and the thickness of the lubricating oil film to decrease.
Working principle: Use a grease gun to inject the grease into the grease cylinder through the grease nipple, so that the piston extends out to push the tension spring, and the Idler moves to the left to tension the track. The top tension spring has an appropriate stroke. When the tension is too large The spring is compressed and acts as a buffer; after the excessive tension disappears, the compressed spring pushes the Idler to the original position, which can ensure the sliding along the crawler frame to change the wheel distance, ensure the disassembly and assembly of the crawler, and reduce the walking process To avoid the derailment of the rail chain.
Our-warehouse1
Pack and ship
- Aerial Boom Lift
- China Dump Truck
- Cold Recycler
- Cone Crusher Liner
- Container Side Lifter
- Dadi Bulldozer Part
- Forklift Sweeper Attachment
- Hbxg Bulldozer Parts
- Howo Engine Parts
- Hyundai Excavator Hydraulic Pump
- Komatsu Bulldozer Parts
- Komatsu Excavator Gear Shaft
- Komatsu Pc300-7 Excavator Hydraulic Pump
- Liugong Bulldozer Parts
- Sany Concrete Pump Spare Parts
- Sany Excavator Spare Parts
- Shacman Engine Parts
- Shantui Bulldozer Clutch Shaft
- Shantui Bulldozer Connecting Shaft Pin
- Shantui Bulldozer Control Flexible Shaft
- Shantui Bulldozer Flexible Shaft
- Shantui Bulldozer Lifting Cylinder Repair Kit
- Shantui Bulldozer Parts
- Shantui Bulldozer Reel Shaft
- Shantui Bulldozer Reverse Gear Shaft
- Shantui Bulldozer Spare Parts
- Shantui Bulldozer Winch Drive Shaft
- Shantui Dozer Bolt
- Shantui Dozer Front Idler
- Shantui Dozer Tilt Cylinder Repair Kit
- Shantui Sd16 Bevel Gear
- Shantui Sd16 Brake Lining
- Shantui Sd16 Door Assembly
- Shantui Sd16 O-Ring
- Shantui Sd16 Track Roller
- Shantui Sd22 Bearing Sleeve
- Shantui Sd22 Friction Disc
- Shantui Sd32 Track Roller
- Sinotruk Engine Parts
- Tow Truck
- Xcmg Bulldozer Parts
- Xcmg Bulldozer Spare Parts
- Xcmg Hydraulic Lock
- Xcmg Transmission
- Yuchai Engine Parts