Joystick excavator spare parts for sale
joystick
Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.
advantage
1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service
packing
Carton Boxes, or according to clients’ request.
description
The operation of the joystick of an excavator is different from that of a car, and the joystick is in the center position in a natural state. For example, when rotating, you need to consider the inertia of the excavator. When you shake the joystick, the excavator starts to rotate. Then loosen the joystick. After the joystick is naturally centered, the excavator will continue to rotate due to inertia, so you should consider shaking during operation. The distance of the operating joystick.
In addition, the large and small arms of the excavation and the expansion and contraction of the bucket use these two joysticks. With the different swing positions, the speed and strength of the action will change. Due to the difference of excavator models and brands, some excavator joysticks are equipped with function buttons that can increase power instantly. For example, the strength of the large and small arms can be increased during hoisting, and the boom speed can be increased during loading operations.
The operating joystick is a proportional pressure control valve, which is installed under each operating joystick in the cab. The joystick is a kind of machinery that is convenient for workers to operate. It can output corresponding control oil pressure according to the stroke of the driver’s operating joystick, so that the main control valve spool has a corresponding amount of movement to control The working speed of the working device.
All parts of the joystick are precision parts, so you should be careful when operating to prevent the parts from colliding with each other or falling.
Excessive knocking or prying during operation will cause burrs or damage to the parts, which will lead to problems such as failure to install, oil leakage, and performance degradation. Full attention must be paid.
If left unattended after disassembly or during disassembly, the parts may rust due to moisture and dust. Therefore, when the operation is interrupted by necessity, rust and dust prevention work should be done.
Our-warehouse1
Pack and ship
- Aerial Boom Lift
- China Dump Truck
- Cold Recycler
- Cone Crusher Liner
- Container Side Lifter
- Dadi Bulldozer Part
- Forklift Sweeper Attachment
- Hbxg Bulldozer Parts
- Howo Engine Parts
- Hyundai Excavator Hydraulic Pump
- Komatsu Bulldozer Parts
- Komatsu Excavator Gear Shaft
- Komatsu Pc300-7 Excavator Hydraulic Pump
- Liugong Bulldozer Parts
- Sany Concrete Pump Spare Parts
- Sany Excavator Spare Parts
- Shacman Engine Parts
- Shantui Bulldozer Clutch Shaft
- Shantui Bulldozer Connecting Shaft Pin
- Shantui Bulldozer Control Flexible Shaft
- Shantui Bulldozer Flexible Shaft
- Shantui Bulldozer Lifting Cylinder Repair Kit
- Shantui Bulldozer Parts
- Shantui Bulldozer Reel Shaft
- Shantui Bulldozer Reverse Gear Shaft
- Shantui Bulldozer Spare Parts
- Shantui Bulldozer Winch Drive Shaft
- Shantui Dozer Bolt
- Shantui Dozer Front Idler
- Shantui Dozer Tilt Cylinder Repair Kit
- Shantui Sd16 Bevel Gear
- Shantui Sd16 Brake Lining
- Shantui Sd16 Door Assembly
- Shantui Sd16 O-Ring
- Shantui Sd16 Track Roller
- Shantui Sd22 Bearing Sleeve
- Shantui Sd22 Friction Disc
- Shantui Sd32 Track Roller
- Sinotruk Engine Parts
- Tow Truck
- Xcmg Bulldozer Parts
- Xcmg Bulldozer Spare Parts
- Xcmg Hydraulic Lock
- Xcmg Transmission
- Yuchai Engine Parts
