Left rear combination lamp 803599544 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 803599544
Part name: Left rear combination lamp
Compatible equipment model: xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805105495 GB/T70.1-2008 screw M22×80(10.9)
805105497 GB/T70.1-2008 Screw M16×110
805203800 GB/T6181-1986 Nut M30
805203820 GB/T6178-1986 slotted nut M24×2
380601684 GR180RⅣ.10.2-2A Left blade
380601685 GR180RⅣ.10.2-3A Right blade
380900707 XGYG07-059 Right hinged steering cylinder
380901059 GR215Ⅹ.17-21 Gasket
800106636 80513003 Half shaft
803602298 UK2.5B terminal block import
805000130 JB/T999-1977 Bolt M18×1.5×40
805105455 GB/T819.2-1997 Cross recessed countersunk head screw M10×85
805604516 GR215Ⅹ.17-12 pin
276100553 LQC80B.5.1.3-12 Liner (11)
380300674 GR135.14.2.4 shock absorber
380602198 GR180D.14.2-5 support plate
380602199 GR180D.14.2-6 support plate
380602309 GR180DⅤ.15-1 Fender
800104128 Machine filter VG61000070005
800511416 Bearing end cover for SN518 housing (domestic)
800903201 KA series check valve KA-L15
801902982 Plain canvas 300×L
803192239 ABC8-02 Lock Nut Straight Terminal
803300172 TJBC ferrule φ30
803605069 Cable YC3×2.5+1×1.5
803612067 YCW500 cable 3×35 square +1
803612076 BVR-2.5 copper core wire (2.5 mm2)
803613322 Fuse 20A (chip)
805000030 GB/T5782-2000 Bolt M16×110
805004746 GB/T5783-2000 Bolt M10×65 10.9
805046482 GB/T5783-2000 Bolt M12×30(Dacromet)
805046586 GB/T5783-2000 Bolt M18×55 10.9(Dacromet)
805048231 GB/T5783-2000 Bolt M16×75 10.9(Dacromet)
805103544 GB/T70.1-2000 screw M20×50(10.9)
805200244 GB/T6171-2000 Nut M24×2
805203825 GB/T6178-1986 slotted nut M36
805338335 Nord-Lock washer 18
805604511 GR215A.09-2 pin
805801083 GB/T4622.2-2003 Graphite spiral wound gasket with inner ring DN80
805801084 GB/T4622.2 Inner ring type graphite with gasket DN65
819906722 BH65C1 grooved idler
819911325 Compression spring 0732041183 (Hangto)
840344108 60° outside sharp knife
393100394 WB21K.18.9 Flexible shaft
800107063 0730150759 Wear pad
800903169 SR series five-way small electromagnetic directional valve SR561-RN35D
805000281 GB/T5783-2000 Bolt M20×40
805000605 GB/T5782-2000 Bolt M20×150
805046516 GB/T5783-2000 Bolt M8×50(Dacromet)
276300177 LQC120.5.1-5 paddle arm (1)
380900732 XGYG07-116 Blade swing cylinder
380901141 GR215C.12.2 worm gear box
381600144 PY180G.13.1-1/-4 FORK ASSY
803190302 Air filter element C28-1440
805046238 GB/T5783-2000 Bolt M10×40 10.9(Dacromet)
805046497 GB/T5783-2000 Bolt M6×25(Dacromet)
380900709 XGYG07-061 Left articulated steering cylinder
380900923 GR215Ⅹ.14-4 Upper hinge shaft
396102028 XCMG-5 NOZZLE

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service