Left side panel 134901196 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 134901196
Part name: Left side panel
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

800141687 C3944153 main bearing
800152729 AA2958 Air filter element (including safety filter element, main filter element)
800307655 Coupling LJ103A×1000-LJ110C×2100
800902586 4V310-10-AC220V solenoid valve
803011063 5000-E164 Multi-way directional valve
803545724 UZK-41-300 (high temperature type) shaft protection tube type anti-rotation material level controller
803612181 Copper nose 200A
805002091 GB/T5783-2000 Bolt M24×85
805003891 GB/T5783-2000 Bolt M24×90(10.9)
805003917 GB/T5783-2000 Bolt M20×45(10.9)
805010094 GB/T5782-2000 Bolt M24×145(10.9)
805046549 GB/T5783-2000 Bolt M12×40 10.9 Dacromet=805006287
805604512 GR215Ⅹ.10.1-5 pin
805604515 GR215Ⅹ.17-11 pin
805604632 GB/T91-2000 pin 8×90
819911326 Guide ring 4642308083 (Hang tooth)
380900706 XGYG07-051 Left blade shovel angle change oil cylinder
380901023 GR215Ⅹ.01-3 elbow
381600229 PY180-G6 Right blade lift cylinder
800107867 4070801/FS1003 oil-water separator filter element
803645768 XB2-BW36M1C button
805000721 GB/T5783-2000 Bolt M12×30 10.9
805002086 GB/T5783-2000 Bolt M22×55 10.9
805140967 GB/T79-2007 Screw M16×40(Dacromet)
276100189 LQC80B.10.2-7 Flange DN25
276400555 LQC160A.10.1.1.1.1.5-1 Flange DN80
276903402 XAP160.5.1.1.7-2 Liner 2
380901019 GR215Ⅹ.01-1 transition plate
381600466 PY180G.10.2.2.3-6 Right side guard
393200774 XL250K.19.1-6 knife holder two
800107310 82513604 Bearing Spacer (Meritor)
800107345 83513206 Planet carrier (Meritor)
800107364 0734401078 Snap seal ring (hang tooth)
800153854 80513013 Set screw M14×18
800308430 Roller 20GS3210A
800308434 52060006 Washer(Meritor)
800752715 Nozzle SY-1/8-12008
800787751 SPT1003S-L Sprinkler
800901207 953-000-P15-23 Solenoid valve
800901382 QGBQ80-300-MP3-S-K cylinder
800901461 360500 07 Tube Nut M12
800903234 Lock Nut Right Angle Terminal ABL12-04

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service