21. Low braking gas pressure will cause poor braking or no braking
The cause of the problem: the air compressor is damaged. Due to the leakage of the pipeline, damage or regulation of the multi -functional load unloading valve, the pressure of the air is insufficient and low pressure.
Elimination method: Check and replace damaged parts or replace components, check and tighten the leak, Risho unloading valve or adjusting pressure to reach the standard value.
22. Normal brake pressure causes poor braking effect or no braking
Reason: Damage of the brake cup or the damage of the air control truncation valve, the brake valve exhausts the hub and the brake lining is excessively worn.
Removal method: Replace the leather cup or pneumatic intercept valve, adjust the gap or replace the brake valve, and replace the damaged parts.
23. Make an abnormal sound during braking
The reason for the problem: The friction sheet of the gate is too hard or the rivets are exposed. There are metal dandruff between the brake hub and the friction plate, the brake is overheated, and the surface of the friction piece is hardening.
Removal method: Eliminate the above phenomenon.
24. Turn to one side when braking
Reasons: Different gaps between the two front wheel brake discs and friction pieces. The contact area of the two front wheel friction tablets is different. There is air in the front wheel piston, the deformed of the front wheel brake pliers, the two front wheels The air pressure was inconsistent, and the side wheels were wet by oil and sewage.
Elimination method: Check whether the brake disc and friction chips are damaged and replaced, check and replace the friction tablet, discharge the air in a correct way, replace it, the air pressure is adjusted and the air pressure is the same, washed and dry.
25. Step on the brake pedal while driving, and suddenly brake fault
problem causes:The sealing ring of the main cylinder was damaged or turned over. There was no brake fluid in the Libi total pump, and no braking pipe pipe pipe was severely broken or the pipe joint was disconnected.
Exclusion method: Replace the damaged sealing ring, add enough brake fluid to achieve the standard value, empty the air in the oil circuit, and replace the damaged braking pipeline.
If you need to purchase the loader accessories during the use of the loader, please contact us. CCMIE will serve you wholeheartedly.
Post time: Apr-02-2024