The breaker hammer is one of the most commonly used attachments for excavators. Crushing operations are often required in demolition, mining, and urban construction. How to use the breaker correctly cannot be ignored. Correct operation can improve the working efficiency of the breaker and extend the service life of the breaker. Operation precautions include the following:
(1) Before each use, check the high and low pressure oil pipes of the breaker for oil leakage and looseness. In addition, you should always check whether there are oil leaks in other places to prevent the oil pipe from falling off due to vibration, causing failure.
(2) When the breaker is operating, the drill rod should always be kept perpendicular to the surface of the stone, and the drill rod should be compacted. After crushing, the crushing should be stopped immediately to prevent empty hitting. Continuous aimless impact will cause damage to the front body of the breaker and serious loosening of the main body bolts, which may injure the host itself.
(3) Do not shake the drill rod when performing crushing operations, otherwise the bolts and drill rod may break.
(4) It is strictly forbidden to operate the breaker in water or mud. Except for the drill rod, the front sheath and above of the breaker cannot be flooded in water or mud.
(5) When the broken object is a large hard object (stone), please choose to crush from the edge. No matter how big and hard the stone is, it is usually more feasible to start from the edge, and it is the same fixed point. When hitting continuously for more than one minute without breaking it. Please change the selected point of attack and try again.
If you need to buy a breaker or excavator, you can contact us. CCMIE not only sells various spare parts, but also construction machinery.
Post time: Mar-19-2024