Nut 805204014 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 805204014
Part name: Nut
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

380500428 GR165Ⅲ.20.1-3 Rear transition block
380601689 GR180RⅣ.10.2.1-2A Large bending plate
380601735 GR180DⅤ rear axle assembly (BR)
380903043 GR165Ⅲ Front bulldozer (spare part)
380903676 GR215Ⅹ.13-3 Copper sleeve (copper)
380903803 XPRC1333H019-01 rear axle assembly
381300559 GR300.25.3-1 rake bar
381600223 PY180-G2 Front axle tilt cylinder
381600225 PY180-G3 Left blade shovel angle change oil cylinder
381601105 PY180G.10.2-3 Right Blade ZBJ
384501303 XM50.12.3.2-1A seat plate
387400361 XC500.04-11 Rubber tube φ285×3-150
387400378 XC500.05-18 felt ring Ⅰ
387500174 XC800.05.14-3A stirring arm
390201351 XLZ250.05.3.1.7-1 Toolholder AL
390201352 XLZ250.05.3.1.8-1 Tool holder BL
390201353 XLZ250.05.3.1.9-1 Tool holder CL
390201354 XLZ250.05.3.1.10-1 Toolholder EL
390201355 XLZ250.05.3.1.11-1 Toolholder DL
390201356 XLZ250.05.3.1.12-1 Toolholder AR
390201357 XLZ250.05.3.1.13-1 Tool holder BR
390201358 XLZ250.05.3.1.14-1 Toolholder CR
390201359 XLZ250.05.3.1.15-1 Toolholder ER
390201360 XLZ250.05.3.1.16-1 Toolholder DR
392100314 XS13.06.6 Small swivel
800105923 Hand throttle controller LJ103A
800105949 Fan D16L-000-11
800106811 4644230801H Diaphragm Assembly (Hangzhou)
800106902 4644303529 Stop gasket
800106904 4644303547 Output flange
800107081 0635303203 Needle Roller Bearing F3526 (Hangtooth)
800107082 0635303205 Needle roller bearing F4026 (Hangtooth)
800107086 0735358069 Needle roller bearing (Hangtooth)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service