Pulley assembly 110901317 truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 110901317
Part name: Pulley assembly
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

612600091077 Starter motor
800155685 fan
K2335A filter
3415609 Alternator
5303837 Alternator
82214207 DIFFERENTIAL ASSY
82214203 GEAR SET – FRONT
82215101 GEAR SET – REAR
82350200 CARRIER ASSY
82351100 CARRIER ASSY
CBQL-532/532-CF GEAR PUMP
800901158 BRAKE PEDAL
ZL20-034001 TRANSMISSION OIL PAN
XT870A.10-1 DOOR GLASS – RIGHT
XT870A,10-2 DOOR GLASS – LEFT
ZL12-15-1 DIFFERENTIAL ASSY
630-3509100A AIR COMPRESSOR
W100000251A CABLE
2BS315A TRANSMISSION ASSY
ZLQ15-3 FINAL DRIVE ASSY
408100557 FINAL DRIVE CARRIER
408100360 FINAL DRIVE SUN GEAR
408100772 RING GEAR Z=58
490B-01002A/03A CYLINDER HEAD BOLTS SET

Z8G.7.1.30B steel
Z7 side discharge assembly
Z6G.8III.1-1 cutting board
Z6G.14.1 air conditioning assembly
Z6A.5.9-1 bearing cap
Z5GH.14.2 air conditioning assembly
Z5G.Z7(8.1IV)
Z5G.Z7(8.1II)
Z5G.9-3 tube
Z5G.8.1VI sand bucket
Z5G.8.1III-1 (L) cutting board I
Z5G.8.1III.1 Bucket
Z5G.8.1II.1A-7 major cutting board
Z5G.8.1D.1-1 board
Z5G.8.1.1A Bucket
Z5G.7.3B-1 connector block
Z5G.7.3.6 steering wheel steering column assembly
Z5G.3-6 washer
Z5G.3-2
Z5G.31.2-1 sleeve
Z5G.31.2.1 rod
Z5G.30.1 hinge bracket
Z5G.17A Spares crates
Z5G.1.3.5
Z5G.1.3.4B 25-1650 2 * 90 hose
Z5G reinforcing plate (with rocker)
Z5G Luxury side mirror
Z5G (YS1) .1.5 rear propeller shaft
Z5G (YS1) .1.4 front propeller shaft (including the transmission)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service