Turntable main body 114004803 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 114004803
Part name: Turntable main body
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

800107106 4644308265 Gasket (Hangtooth)
800515236 GB/T288-1994 spherical roller bearing 23218CC/W33
803010464 V3.0510-08 Pressure filter element
803010923 XG92-31-00 tailgate cylinder
803192149 A pack of PDJ-8 sealing ring (for C series cylinder)
803198195 HTH2-H12L/H12L-1450A pressure measuring hose
803198487 LH0160D010BN3HC filter element
803507245 PS-005 Oil Pressure Sensor (Kangbo)
803544180 WRNK-236(L150×100G3/4) Thermocouple
803545739 B20.00.24V Rotary warning light
803604877 Proximity switch XS7-C40FP260
803611821 3129020 Solenoid valve plug (replace with 803000646)
803612157 JD291 relay
803645991 RXM4LB2P7 intermediate relay
803666709 JK411A key switch
805003919 GB/T5783-2000 Bolt M20×75 10.9
805600224 GB/T91-2000 Pin 5×80
819911125 XLZ fuse one pack
380600518 GR180Ⅲ.01-18 pipe clamp
380600548 GR180D.01-1 intake pipe
380600551 GR180D.01-6 trachea Ⅱ
380600552 GR180D.01-7 Outlet pipe Ⅰ
380700270 GR185.20-3 platen
380700274 GR185.06.2-1 oil return valve block
380900861 GR215.14.5-4 bushing
380900986 GR215A.01-3 pipe clamp
380901143 GR215C.12-1 mounting plate
380903041 GR215Ⅹ front bulldozer (spare part)
380903042 GR215Ⅹ rear loose (spare part)
380903075 GR215Ⅹ.17.5A Left steering knuckle
380903562 GR215.10.1-2A Left blade
800307583 Hydraulic gearbox 4644026366
800515220 GB/T288-1994 Spherical roller bearing 22218CC/W33
800903170 Y-type tee PY12
803011021 QT-ETD/ECD30-0610024 Solenoid valve group
803192198 HTG063/25MPa/psiG1/4 pressure gauge
803270612 GR215DⅡ.06.1-1A Bracket
803502466 ICE914-243001 Voltmeter
803507249 ICE911-243008 Torque Converter Oil Temperature Gauge (Kangbo)
803507253 331.810.012.001 Hour meter
803542996 FS-004-E850 Fuel sensor
803705798 ICE913-243009 Torque Converter Oil Pressure Gauge (Kangbo)

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service