Wholesale Price PC360-7 hydraulic pump - Power take-off for truck crane spare parts – CCMIC

Power take-off

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones

Advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

Constitute:
Power take-off is one or more sets of variable speed gears, also known as power output, which is generally composed of a gear box, clutch, and controller. It is connected with the low gear of the gearbox or the output shaft of the auxiliary box to output power to the outside. Working devices, such as lifting pumps, etc.

Maintenance：
When the power take-off of a heavy-duty dump truck fails, the most direct and obvious result is that the gear pump does not rotate, the hydraulic dumping system loses its power source, and the entire system is in a state of paralysis and cannot work.

Pneumatic power take-offs are mostly used on heavy dump trucks, which are mainly composed of three parts: transmission mechanism, connecting mechanism and operating mechanism. The most common fault in these three parts is the operating mechanism, which uses solenoid valve to switch the air circuit. The solenoid valve controls the control cylinder of the power take-off, so as to complete the shifting and shifting work of the power take-off. During the unloading process, the solenoid valve must be operated frequently, and its parts are easily damaged and invalid. Therefore, the effectiveness, sensitivity, circuit safety and switch of the solenoid valve should be checked frequently. If the circuit is normal, the working condition of the power take-off cylinder should also be checked. , Whether there is no air leakage or air leakage, if necessary, disassemble the power take-off cylinder to check.

The transmission mechanism and the connecting mechanism should also be maintained and maintained frequently. When the gears of the transmission mechanism are poorly meshed, and the connecting bolts of the shift fork and the push rod are loose, abnormal noises will occur. Check the fastening bolts of each part. At the same time, check the lubricating oil condition and clean up the dirt in time to keep the parts clean and intact to prevent bumps. , Scratch. In addition, the connecting bushing between the power take-off and the oil pump should be checked frequently. If it is not firm, damaged, taken off or broken, it should be replaced in time.

Our-warehouse1

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts